Home :Manufacturers : Hawke : Group 1 Mining Cable Glands & Flanges

Group 1 Mining Cable Glands & Flanges

Mining Gland Features

Our cable gland range incorporates innovative features that along with safety, enable faster installation, facilitate inspectability of the cable gland in it's operable condition, prevent corrosion of the cable armour/braid and in some cases help to go beyond the requirement of merely having the appropriate certification. More detailed information on these features can be found in our article Why Should You Specify Cable Glands, which further emphasises why our cable glands are the lowest lifetime cost solution.

453/Universal Cable Gland (Group 1 Mining)

Mining. For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘ Z’ elastomer and plastic insulated cables. For particular use with cables that exhibit ‘cold flow’ characteristics..

453/RAC Cable Gland (Group 1 Mining)

Mining. For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armoured ‘Z’ elastomer and plastic insulated cables..

453/T Cable Gland (Group 1 Mining)

Mining. For use with pliable wire armoured cables..

Hawke Type 483 Adaptor Flange

To allow metric threaded Group I Cable Gland types, 653/Universal, 653/T and 623 to be used in size up spigot entries.

Hawke Type 484 Spigot Flange

To allow metric threaded Group I Cable Gland types, 653/Universal, 653/T and 623 to be used in the same size spigot entries.

Hawke Type 470 Adaptor Flange

To close unused Cable Gland entries and maintain the flameproof integrity of the equipment.

Hawke 653 Universal Cable Gland - Group 1 Mining

Outdoor or Indoor use. For use with single wire armoured ‘W’, wire braided ‘X’ and steel tape armoured ‘Z’ elastomer and plastic insulated cables. For use in all mining applications particularly those with :- a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers. b) Cables that exhibit ‘cold flow’ characteristics. c) Enclosures containing an ignition source.

Hawke 653/T Cable Gland - Group 1 Mining

Outdoor or Indoor use. For use with non-armoured elastomer and plastic insulated cables. For use in all mining applications particularly those with: a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers. b) Cables that exhibit ‘cold flow’ characteristics. c) Enclosures containing an ignition source.

Hawke 623 Cable Gland - Group 1 Mining

Outdoor or Indoor use. For use with non-armoured elastomer and plastic insulated cables. For use in all mining applications particularly those with :- a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers. b) Cables that exhibit ‘cold flow’ characteristics. c) Enclosures containing an ignition source.