Hawke

Hazardous Area Cable Glands

501/453/RAC/L

501/414 | 501/421| 501/423 | 501/453/RAC | 501/453/RAC/L | 501/453/Universal | CSB 656 | ICG 623
ICG 653/Universal | ICG 653/Universal/L | PSG 553/RAC | SB 474 | Oversize Cable Glands

Application

Outdoor or Indoor use.
For use with single wire armoured ‘W’, wire braided ‘X’ and steel tape armoured ‘Z’ elastomer and plastic insulated cables with a lead inner sheath.

Features

Provides armour clamping using one clamping arrangement for all armour/braid types.
Provides a seal and an electrical bond on the cables lead inner sheath.
Deluge protection option available.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

Materials & Finishes

The 501/453/RAC/L Cable Gland is manufactured as standard in Brass, Stainless Steel and Aluminium.
NPT entries are nickel plated as standard.
Full nickel plating by electroplating or electroless plating is also available, as are other materials on request.

Technical Data

Flameproof Exd and Increased Safety Exe. II 2 GD
Baseefa Certificate No. BAS01ATEX2072X. For sizes O - F.
Baseefa Certificate No. BAS01ATEX2296X. For sizes G - J.
The above certificates are still current, however they are to be superseded by:
Baseefa Certificate No. Baseefa06ATEX0056X. For sizes Os - F.
IECEx Certificate No. IECEx BAS 06.0013X. For sizes Os - F.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Suitable for use in Gas Groups IIA, IIB and IIC.
Construction and test standards EN 50014, EN 50018, EN 50019 and EN 50281-1-1. IEC 60079-0, IEC 60079-1 and IEC 60079-7.
IP66, IP67 and IP68 (30 metres for 7 days) ingress protection to IEC 60529, EN 60529 and NEMA 4X.
DTS01 deluge protection certified by ITS.
Operating temperature range -60°C to +80° as standard.

Alternative certification options available:
Option available, Exd IIC, Exe II. Certificate No. 1015065 (LR 78713-7).
Option available, BR-Exd IIC/Exe II.
GOST R-Exd IICU/Exe IIU.
DNV Certificate No.E-8003.

Dimensions 501/423/RAC/L

Cable Gland Selection
Size Ref.	Entry Thread Size			Thread Length ‘H’	Cable Acceptance Details								‘G’ Compressed Length	Hexagon Dimensions
	Entry Thread Size				Inner Lead Sheath ‘A’				Outer Sheath ‘B’		‘C’ Armour/Braid
	Metric	NPT *			Standard Seal+Bond		Alternative Seal+Bond
		NPT *			Standard Seal+Bond		Alternative Seal+Bond							Across Flats	Across Corners
		Standard	Option		Min.	Max.	Min.	Max.	Min.	Max.	Orientation 1	Orientation 2		Across Flats	Across Corners
O	M20 ‡	½"	-	15	6.5	10.5	4.0	8.0	9.5	16.0	0.9 / 1.25	0 / 0.7	65.1	24.0	27.7
A	M20	¾"	½"	15	-	-	8.5	13.0	12.5	20.5	0.9 / 1.25	0 / 0.7	66.1	30.0	34.6
B	M25	1"	¾"	15	12.5	19.0	9.5	15.4	16.9	26.0	1.25 / 1.6	0 / 0.7	71.4	36.0	41.6
C	M32	1¼"	1"	15	19.0	25.0	14.5	21.2	22.0	33.0	1.6 / 2.0	0 / 0.7	75.2	46.0	53.1
C2	M40	1½"	1¼"	15	25.0	31.2	22.0	28.0	28.0	41.0	1.6 / 2.0	0 / 0.7	77.1	55.0	63.5
D	M50	2"	1½"	15	31.5	42.3/42.8 †	27.5	34.8	36.0	52.6	1.8 / 2.5	0 / 1.0	90.3	65.0	75.1
E	M63	2½"	2"	15	42.0	53.3/54.5 †	39.0	46.5	46.0	65.3	1.8 / 2.5	0 / 1.0	96.7	80.0	92.4
F	M75	3"	2½"	15	54.5	66.0/64.3 †	48.5	58.3	57.0	78.0	1.8 / 2.5	0 / 1.0	96.0	95.0	109.6
Larger Cable Glands available in 153/L design as shown below. More details on larger Cable Glands.
G	M80	3½"	-	20	67.0	70.0	-	-	75.0	89.5	#	#	95.6	106.4	123.0
H	M90	3½"	-	20	67.0	75.0	-	-	75.0	89.5	#	#	95.6	115.0	132.8
J	M100	4"	-	20	75.0	89.5	-	-	88.0	104.5	#	#	95.6	127.0	146.7
† Smaller value is applicable when selecting the option NPT entry thread. ‡ Size O is available with an M16 thread size. For O size with M16 thread, the maximum cable inner sheath diameter is 10.9mm. O - F size metric entry threads are 1.5mm pitch as standard. For G size Cable Glands and above, a 2mm pitch is supplied as standard (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. All dimensions in millimetres (except*).

Alternative Reversible Armour Clamping Ring (RAC)

Selection Table
Size Ref.	Steel Wire Armour/Braid/Tape
Size Ref.	Orientation 1	Orientation 2
O/Os	0.8 / 1.0	0.4 / 0.8
A	0.8 / 1.0	0.4 / 0.8
B	0.9 / 1.25	0.4 / 0.8
C	1.2 / 1.6	0.6 / 1.2
C2	1.2 / 1.6	0.6 / 1.2
D	1.45 / 1.8	1.0 / 1.45
E	1.45 / 1.8	1.0 / 1.45
F	1.45 / 1.8	1.0 / 1.45

More Information

Assembly Instructions

Additional assembly instructions for lead sheathed cables
Cable Gland Data Sheet

Cable Gland Ordering Examples

Type/Size/Thread/Standard Inner Seal + Bond
e.g. 501/453/RAC/C/M32/L
501/453/RAC/C/1¼" NPT/L

Cable Gland with Alternative Seal (S)

e.g. 501/453/RAC/C/M32/K
501/453/RAC/C/1¼" NPT/K

Cable Gland With Alternative Clamping Ring

e.g. 501/453/RAC/C/M32/L/AR
501/453/RAC/C/1¼" NPT/L/AR

Hawke Cable Glands | Hawke Enclosures | Hawke EX Connectors | Hawke Adaptors & Reducers

Hawke Transformer Breathers | Hawke Accessories

Contact the Cable Systems Ltd sales office for further details and prices.

Tel: (01925) 852745

Fax: (01925) 820803

Email: sales@cablesystems.co.uk

Account Application

View Shopping Cart

Ex-Mo - the NEW Hazardous Area Motion Sensor

Recent News

Our sister company JK Electrical has recently launched a new website. JK Electrical are specialist suppliers of Telemecanique products.

Hours of Business
Monday-Thursday 8am-5pm Friday 8am-3pm

Hawke Hazardous Area Cable Gland 501/453/RAC/L. Cable Systems supply Cable Glands and other electrical products including Hawke EExe certified junction boxes to suit the customers requirements whilst still retaining certification. This is endorsed and backed by Hawke Cable Glands Limited, which offers customers a fast lane service for this product. This service is also available on industrial enclosures. In doing this, we have had to obtain certification by the Electrical Equipment Certification Service (EECS) for the Stockist Assembler Scheme. This was attained in 1994 and allows ourselves to issue our own Licence with the BASEEFA certificate.