Hawke
Industrial Cable Gland 153/RAC (Type E1W, E1X and E1Z)
Industrial Cable Gland 114 | Industrial Cable Gland 121 (Type A2) | Industrial Cable Gland 123 (Type A2)
Industrial Cable Gland 150/RAC (Type BW, BX and BZ) | Industrial Cable Gland 151/RAC (Type CW, CX and CZ)
Industrial Cable Gland 153/RAC (Type E1W, E1X and E1Z) | Industrial Cable Gland 153/RAC/L (Type E2W, E2X and E2Z)
Industrial Cable Gland 153/Universal (Type E1W, E1X and E1Z)
Application
Outdoor or Indoor use.
For use with single wire armoured ‘W’ wire braided ‘X’ and steel tape armoured ‘Z’ elastomer and plastic insulated cables.
Features
Provides armour clamping using one clamping arrangement for all armour/braid types.
Provides a seal on the cables inner sheath.
Deluge protection option available.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.
Materials & Finishes
The 153/RAC Cable Gland is manufactured as standard in Brass, Stainless Steel and Aluminium.
NPT entries are nickel plated as standard.
Full nickel plating by electroplating or electroless plating is also available, as are other materials on request.
Technical Data
Construction and test standards EN 50262. BS 6121 Part 1. Type E1W, E1X and E1Z.
IP66, IP67 and IP68 (30 metres for 7 days) ingress protection to IEC 60529, EN 60529 and NEMA 4X.
DTS01 deluge protection certified by ITS.
Operating temperature range -60°C to +80°C as standard.
| Cable Gland Selection | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size Ref. |
Entry Thread Size |
Thread Length ‘H’ |
Cable Acceptance Details | ‘G’ Compressed Length |
Hexagon Dimensions |
||||||||||
| Inner Sheath ‘A’ | Outer Sheath ‘B’ |
‘C’ Armour/Braid |
|||||||||||||
| Standard Seal |
Alternative Seal (S) |
||||||||||||||
| Metric | NPT * |
||||||||||||||
| Standard | Option | Min. | Max. | Min. | Max. | Min. | Max. | Orientation 1 |
Orientation 2 |
Across Flats | Across Corners |
||||
| Os | M20 ‡ | ½" | - | 15 | 3.0 | 8.0 | - | - | 5.5 | 12.0 | 0.9 / 1.25 | 0 / 0.7 | 65.1 | 24.0 | 27.7 |
| O | M20 ‡ | ½" | - | 15 | 6.5 | 11.9 | - | - | 9.5 | 16.0 | 0.9 / 1.25 | 0 / 0.7 | 65.1 | 24.0 | 27.7 |
| A | M20 | ¾" | ½" | 15 | 10.0 | 14.3 | 8.5 | 13.4 | 12.5 | 20.5 | 0.9 / 1.25 | 0 / 0.7 | 66.1 | 30.0 | 34.6 |
| B | M25 | 1" | ¾" | 15 | 12.5 | 20.2 | 9.5 | 15.4 | 16.9 | 26.0 | 1.25 / 1.6 | 0 / 0.7 | 71.4 | 36.0 | 41.6 |
| C | M32 | 1¼" | 1" | 15 | 19.0 | 26.5 | 14.5 | 21.2 | 22.0 | 33.0 | 1.6 / 2.0 | 0 / 0.7 | 75.2 | 46.0 | 53.1 |
| C2 | M40 | 1½" | 1¼" | 15 | 25.0 | 32.5 | 22.0 | 28.0 | 28.0 | 41.0 | 1.6 / 2.0 | 0 / 0.7 | 77.1 | 55.0 | 63.5 |
| D | M50 | 2" | 1½" | 15 | 31.5 | 44.4/42.3 † | 27.5 | 34.8 | 36.0 | 52.6 | 1.8 / 2.5 | 0 / 1.0 | 90.3 | 65.0 | 75.1 |
| E | M63 | 2½" | 2" | 15 | 42.5 | 56.3/54.3 † | 39.0 | 46.5 | 46.0 | 65.3 | 1.8 / 2.5 | 0 / 1.0 | 96.7 | 80.0 | 92.4 |
| F | M75 | 3" | 2½" | 15 | 54.5 | 68.2/65.3 † | 48.5 | 58.3 | 57.0 | 78.0 | 1.8 / 2.5 | 0 / 1.0 | 96.0 | 95.0 | 109.6 |
Larger Cable Glands available in 501/453 design as shown below. More details on larger Cable Glands. |
|||||||||||||||
| G | M80 | 3½" | - | 20 | 67.0 | 72.0 | - | - | 75.0 | 89.5 | # | # | 95.6 | 106.4 | 123.0 |
| H | M90 | 3½" | - | 20 | 67.0 | 76.6 | - | - | 75.0 | 89.5 | # | # | 95.6 | 115.0 | 132.8 |
| J | M100 | 4" | - | 20 | 75.0 | 90.6 | - | - | 88.0 | 104.5 | # | # | 95.6 | 127.0 | 146.7 |
| † Smaller value is applicable when selecting the option NPT entry thread. Sizes Os and O are available with an M16 thread size. For O size with an M16 thread, the maximum cable inner sheath diameter is 10.9mm. Os - F size metric entry threads are 1.5mm pitch as standard. For G size Cable Glands and above, a 2mm pitch is supplied as standard (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. All dimensions in millimeters (except*). # Dedicated armour clamping rings are fitted. Please specify armour type and size. |
|||||||||||||||
Alternative Reversible Armour Clamping Ring (RAC)
| Selection Table | ||
| Size Ref. | Steel Wire Armour/Braid/Tape | |
| Orientation 1 | Orientation 2 | |
| O/Os | 0.8 / 1.0 | 0.4 / 0.8 |
| A | 0.8 / 1.0 | 0.4 / 0.8 |
| B | 0.9 / 1.25 | 0.4 / 0.8 |
| C | 1.2 / 1.6 | 0.6 / 1.2 |
| C2 | 1.2 / 1.6 | 0.6 / 1.2 |
| D | 1.45 / 1.8 | 1.0 / 1.45 |
| E | 1.45 / 1.8 | 1.0 / 1.45 |
| F | 1.45 / 1.8 | 1.0 / 1.45 |
More Information
Cable Gland Ordering Examples
Type/Size/Thread
e.g. 153/RAC/C/M32
153/RAC/C/1¼" NPT
Cable Gland with Alternative Seal (S)
e.g. 153/RAC/C/M32/S
153/RAC/C/1¼" NPT/S
Cable Gland With Alternative Clamping Ring
e.g. 153/RAC/C/M32/AR
153/RAC/C/1¼" NPT/AR
Order this product now
Please note all prices exclude VAT. (See Terms and Conditions). For deliveries overseas you will be contacted and advised of the deilvery charge.
Hawke Cable Glands | Hawke Enclosures | Hawke EX Connectors | Hawke Adaptors & Reducers
Hawke Transformer Breathers | Hawke Accessories
Contact the Cable Systems Ltd sales office for further details and prices.
Tel: (01925) 852745
Fax: (01925) 820803
Email: sales@cablesystems.co.uk
Recent News
Our sister company JK Electrical has recently launched a new website. JK Electrical are specialist suppliers of Telemecanique products.
Hours of Business
Monday-Thursday 8am-5pm
Friday 8am-3pm